Simply Slide and Tighten™ for a reliable connection up to 110mm

Safelok compression fittings are the fitting of choice for industrial applications, where blueline PE pipe is carrying media with chemical, compressed air or dirty water. While the Safelok range has been designed for industrial applications it works equally well in any application where blue line PE pipe is used in sizes up to 110mm including irrigation and civil applications.

  • 1

    Slide and Tighten™

    No pipe preparation is needed and no force is required to push the pipe past the seal. Simply insert the pipe into the fitting until the first point of resistance is felt and then tighten the nut until it touches the flange on the fitting body.

  • 2

    Air line safety

    In the event that work commences on a live air line the use of Philmac Safelok fittings will ensure that a warning is given to the user that the line is live. This is because tightening the nut creates the seal. As the nut is loosened the seal is relaxed causing a loud release of air but the grip is maintained on the pipe.

  • 3

    Rated to 1600 kPa

    Product is rated to 1600 kPa across the range and carries Watermark and Standardsmark accreditation.

  • 4

    No loose components

    Although disassembly of the fitting is not required, if the nut is removed there is no danger of losing components as they are all retained within the nut.

  • 5

    Chemical Resistance

    Safelok fittings are supplied with EPDM seals as standard which means that the fitting can withstand a wide range of chemicals (including many acids) without the need for an additional kit. Alternative seal materials are available as a kit if required.

  • 6

    Impact Resistance

    Safelok fittings are made from a high grade of polypropylene to provide significant resistance to impact.

  • 7

    Visual stop

    The flange on the body of the fitting acts as a visual cue to indicate when the nut is fully tightened. Once the nut touches the flange on the body, the fitting is in a fully tightened state.

Safelok Metric Compression Product Sizes

SAFELOK® NUT ASSEMBLY INCL POLYSULFONE GRIP RING. VITON O-RING AND PP SPACER
Product Number Size
99 9022 10 20
99 9033 10 25
99 9044 10 32
99 9055 10 40
99 9066 10 50
99 9077 10 63
99 9088 10 75
99 9099 10 90
99 9000 10 110
⁺ Specialised product for mining & compressed air applications, for further information please contact your local Philmac representative.

SAFELOK® NUT ASSEMBLY INCL POLYSULFONE GRIP RING, EPDM O-RING AND PP SPACER
Product Number Size
90 7122 10 20
90 7133 10 25
90 7144 10 32
90 7155 20 40
90 7166 10 50
90 7177 10 63
90 7188 10 75
90 7199 10 90
90 7100 10 110

SAFELOK® NUT ASSEMBLY INCL POM GRIP RING, VITON O-RING AND PP SPACER
Product Number Size
90 7022 10 20
90 7033 10 25
90 7044 10 32
90 7055 10 40
90 7066 10 50
90 7077 10 63
90 7088 10 75
90 7099 10 90
90 7000 10 110

SAFELOK® NUT ASSEMBLY INCL POM GRIP RING AND NBR O-RING
Product Number Size
97 7702 00 20
97 7703 00 25
97 7704 00 32
97 7705 00 40
97 7706 00 50
97 7707 00 63
97 7708 10 75
97 7709 10 90
97 7701 10 110

SAFELOK® NUT ASSEMBLY INCL POM GRIP RING AND EPDM O-RING
Product Number Size
99 9702 00 20
99 9703 00 25
99 9704 00 32
99 9705 00 40
99 9706 00 50
99 9707 00 63
99 9708 10 75
99 9709 10 90
99 9701 10 110

SAFELOK® SHOULDERED ADAPTOR
Product Number Size
97 8166 20 50 x 2”
97 8176 20 63 x 2”
97 8199 10 90 x 4”
97 8107 10 110 x 2”
97 8109 10 110 x 4”
⁺ Specialised product for mining & compressed air applications, for further information please contact your local Philmac representative.

BACKING RING GALVANISED ISO
Product Number Size
99 8777 10 63 x 2"'

BACKING RING GALVANISED AS2129TABLE E
Product Number Size
99 8766 10 50 x 2”
99 8776 10 63 x 2”
99 8779 10 63 x 4”
99 8788 10 75/90 x 3”
99 8709 10 110 x 4”

METRIC FLANGED ADAPTOR POLY – FLANGE ISO
Product Number Size
97 8977 00 63 x 2"'

METRIC FLANGED ADAPTOR POLY – FLANGE AS2129 TABLE E
Product Number Size
97 8966 00 50 x 2”
97 8976 00 63 x 2”
97 8979 00 63 x 4”
97 8988 00 75 x 3”
97 8998 00 90 x 3”
97 8909 00 110 x 4”

SAFELOK® WALL PLATE ELBOW PE x FI BSP
Product Number Size
97 8229 00 20 x 1/2"
97 8238 00 25 x 1/2"
97 8239 00 25 x 3/4"
97 8249 00 (Brass) 25 x 3/4"

SAFELOK® END CAP PE
Product Number Size
97 8019 00 16
97 8029 00 20
97 8039 00 25
97 8049 00 32
97 8059 00 40
97 8069 00 50
97 8079 00 63
97 8089 00 75
97 8099 00 90
97 8009 00 110

SAFELOK® FEMALE ELBOW PE x FI BSP
Product Number Size
97 8611 00 16 x 1/2”
97 8621 00 20 x 1/2”
97 8622 00 20 x 3/4”
97 8631 00 25 x 1/2”
97 8632 00 25 x 3/4”
97 8633 00 25 x 1”
97 8642 00 32 x 3/4”
97 8643 00 32 x 1”
97 8644 00 32 x 1-1/4”
97 8653 00 40 x 1”
97 8654 00 40 x 1-1/4”
97 8655 00 40 x 1-1/2”
97 8665 00 50 x 1-1/2”
97 8666 00 50 x 2”
97 8675 00 63 x 1-1/2”
97 8676 00 63 x 2”
97 8686 00 75 x 2”
97 8687 00 75 x 2-1/2”
97 8688 00 75 x 3”
97 8698 00 90 x 3”
97 8609 00 110 x 4”

SAFELOK® MALE ELBOW PE x MI BSP
Product Number Size
97 8721 00 20 x 1/2"
97 8722 00 20 x 3/4"
97 8731 00 25 x 1/2"
97 8732 00 25 x 3/4"
97 8733 00 25 x 1"
97 8743 00 32 x 1"
97 8744 00 32 x 1-1/4"
97 8753 00 40 X 1"
97 8754 00 40 x 1-1/4”
97 8755 00 40 x 1-1/2”
97 8765 00 50 x 1-1/2”
97 8776 20 63 x 2”
97 8788 10 75 x 3"

SAFELOK® ELBOW 45° PE x PE
Product Number Size
97 8028 00 20 x 20
97 8038 00 25 x 25
97 8048 00 32 x 32
97 8058 00 40 x 40
97 8068 00 50 x 50
97 8078 00 63 x 63
97 8008 00 110 x 110

SAFELOK® ELBOW PE x PE
Product Number Size
97 8511 00 16 x 16
97 8522 00 20 x 20
97 8532 00 25 x 20
97 8533 00 25 x 25
97 8544 00 32 x 32
97 8555 00 40 x 40
97 8566 00 50 x 50
97 8577 00 63 x 63
97 8588 00 75 x 75
97 8599 00 90 x 90
97 8500 00 110 x 110

SAFELOK® FEMALE TEE PE x PE x FI BSP
Product Number Size
97 8411 00 16 x 16 x 1/2"
97 8421 00 20 x 20 x 1/2"
97 8422 00 20 x 20 x 3/4"
97 8431 00 25 x 25 x 1/2"
97 8432 00 25 x 25 x 3/4"
97 8433 00 25 x 25 x 1"
97 8442 00 32 x 32 x 3/4"
97 8443 00 32 x 32 x 1"
97 8444 00 32 x 32 x 1-1/4"
97 8453 00 40 x 40 x 1"
97 8454 00 40 x 40 x 1-1/4"
97 8455 00 40 x 40 x 1-1/2"
97 8465 00 50 x 50 x 1-1/2”
97 8466 00 50 x 50 x 2”
97 8474 00 63 x 63 x 1-1/4”
97 8475 00 63 x 63 x 1-1/2”
97 8476 00 63 x 63 x 2”
97 8486 00 75 x 75 x 2”
97 8487 00 75 x 75 x 2-1/2”
97 8498 00 90 x 90 x 3”
97 8409 00 110 x 110 x 4”
⁺ Specialised product for mining & compressed air applications, for further information please contact your local Philmac representative.

SAFELOK® MALE TEE PE x PE x MI BSP
Product Number Size
97 8931 00 25 x 25 x 1/2"
97 8932 00 25 x 25 x 3/4"

SAFELOK® SLIP TEE PE x PE x PE
Product Number Size
97 8032 20 20 x 20 x 20
97 8033 30 25 x 25 x 25
97 8034 40 32 x 32 x 32
97 8035 50 40 x 40 x 40
97 8036 60 50 x 50 x 50
97 8037 70 63 x 63 x 63

SAFELOK® REDUCING TEE PE x PE x PE
Product Number Size
97 8332 00 25 x 25 x 20
97 8334 00 25 x 25 x 32
97 8343 00 32 x 32 x 25
97 8353 00 40 x 40 x 25
97 8354 00 40 x 40 x 32
97 8363 00 50 x 50 x 25
97 8364 00 50 x 50 x 32
97 8365 00 50 x 50 x 40
97 8373 00 63 x 63 x 25
97 8374 00 63 x 63 x 32
97 8376 00 63 x 63 x 50
97 8307 00 110 x 110 x 63

SAFELOK® TEE PE x PE x PE
Product Number Size
97 8311 00 16 x 16 x 16
97 8322 00 20 x 20 x 20
97 8333 00 25 x 25 x 25
97 8344 00 32 x 32 x 32
97 8355 00 40 x 40 x 40
97 8366 00 50 x 50 x 50
97 8377 00 63 x 63 x 63
97 8388 00 75 x 75 x 75
97 8399 00 90 x 90 x 90
97 8300 00 110 x 110 x 110

SAFELOK® END CONNECTOR PE x FI BSP
Product Number Size
97 8811 00 16 x 1/2”
97 8812 00 16 x 3/4”
97 8821 00 20 x 1/2”
97 8822 00 20 x 3/4”
97 8823 00 20 x 1”
97 8831 00 25 x 1/2”
97 8832 00 25 x 3/4”
97 8833 00 25 x 1”
97 8842 00 32 x 3/4”
97 8843 00 32 x 1”
97 8844 00 32 x 1-1/4”
97 8853 00 40 x 1”
97 8854 00 40 x 1-1/4”
97 8855 00 40 x 1-1/2”
97 8864 00 50 x 1-1/4”
97 8865 00 50 x 1-1/2”
97 8866 00 50 x 2”
97 8876 00 63 x 2”
97 8886 00 75 x 2”
97 8887 00 75 x 2-1/2”
97 8896 00 90 x 2”
97 8898 00 90 x 3”
97 8808 00 110 x 3”
97 8809 00 110 x 4”

SAFELOK® END CONNECTOR PE x MI BSP
Product Number Size
97 8211 00 16 x 1/2”
97 8212 00 16 x 3/4”
97 8221 00 20 x 1/2”
97 8222 00 20 x 3/4”
97 8223 00 20 x 1”
97 8231 00 25 x 1/2”
97 8232 00 25 x 3/4”
97 8233 00 25 x 1”
97 8242 00 32 x 3/4”
97 8243 00 32 x 1”
97 8244 00 32 x 1-1/4”
97 8245 00 32 x 1-1/2”
97 8253 00 40 x 1”
97 8254 00 40 x 1-1/4”
97 8255 00 40 x 1-1/2”
97 8256 00 40 x 2”
97 8263 00 50 X 1"
97 8264 00 50 X 1 1/4
97 8265 00 50 x 1-1/2”
97 8266 00 50 x 2”
97 8275 00 63 x 1 1/2”
97 8276 00 63 x 2”
97 8277 00 63 x 2-1/2”
97 8286 00 75 x 2”
97 8287 00 75 x 2-1/2"
97 8288 00 75 x 3”
97 8296 00 90 x 2"
97 8298 00 90 x 3”
97 8299 00 90 x 4"
97 8206 00 110 x 2"
97 8208 00 110 x 3"
97 8209 00 110 x 4”
⁺ Specialised product for mining & compressed air applications, for further information please contact your local Philmac representative.

SAFELOK® SLIP JOINER PE x PE
Product Number Size
97 8012 20 20 x 20
97 8013 30 25 x 25
97 8014 40 32 x 32
97 8015 50 40 x 40
97 8016 60 50 x 50
97 8017 70 63 x 63

SAFELOK® REDUCING JOINER PE x PE
Product Number Size
97 8121 00 20 x 16
97 8131 00 25 x 16
97 8132 00 25 x 20
97 8142 00 32 x 20
97 8143 00 32 x 25
97 8153 00 40 x 25
97 8154 00 40 x 32
97 8163 00 50 x 25
97 8164 00 50 x 32
97 8165 00 50 x 40
97 8174 00 63 x 32
97 8175 00 63 x 40
97 8176 00 63 x 50
97 8187 00 75 x 63
97 8197 00 90 x 63
97 8198 00 90 x 75
97 8107 00 110 X 63
97 8109 00 110 x 90

SAFELOK® JOINER PE x PE
Product Number Size
97 8111 00 16 x 16
97 8122 00 20 x 20
97 8133 00 25 x 25
97 8144 00 32 x 32
97 8155 00 40 x 40
97 8166 00 50 x 50
97 8177 00 63 x 63
97 8188 00 75 x 75
97 8199 00 90 x 90
97 8100 00 110 x 110

Installation/troubleshooting videos

Need some help? View our installation/troubleshooting videos

Learn More